This article will give you step by step installation instructions for the proper way to install your rolling library ladder kit. That way, you can get it right the first time and reap the benefits of owning your first library ladder.Make sure you determine the proper height of the library ladder so you know exactly how high the railing needs to be. Make sure you verify the exact measurements with the manufacturer's suggestion to make sure you know exactly how high to make the railings.
Use a stud finder to find the wall studs across the entire area that you'll be installing the ladder. You need to bolt the rails to the wall in a stud to make sure it is securely in place. Mark the middle of the studs with a pencil.
Insert the rail brackets by screwing in the screws provided, installing them inside the brackets and attaching them securely to the wall studs. One bracket at each end of the rail is the best way to start, and then make sure that any additional brackets are placed no more than 32 inches apart. Now that the brackets are in place, you can install the clips that hold the rail in place. Pre-drill the holes so you can get the screws in easier when you lay down the rail, and use a level to make sure you got it levelled properly.
Next, place each section of the rail onto the now-installed brackets. You do this by sliding the bracket clip into the available slot on the rear side of the railing. Then, connect each of the rail sections by inserting one of the connector pins at one end, then slide the other end of the railing into the holes that are available. Once all of the railings are connected, your track is now one step closer to completion.
There should be a set of end caps in your rolling library ladder kit. Make sure you attach them to the now completed railing, screwing them into the available holes at the end of each of the rails.
And there you have it! Keep in mind that there will always be a set of detailed instructions with your rolling library ladder kit, and these instructions should help to get you through the installation process.
Installing your rolling library ladder kit should be a fun experience, one that you can enjoy and not have to stress about. So if you're having some serious technical issues with your kit, the best thing you can do is ask an expert for some guidance on how to get this project done. The help of an expert can take a once difficult project and turn it into an easy-breezy one that'll take you no time at all.
So if you need some extra help installing your rolling library ladder kit, don't hesitate to give us a call at Modern Stainless Ladders. We've got installation experts standing by that can talk you through the process.