- 1). Open the hood and remove the three screws holding the headlight assembly in place. Place the 8-mm socket over the screw head and turn them counterclockwise with a socket wrench. (There are two screws on the top of the assembly and one in the back on the bottom of the assembly that need to be removed.)
- 2). Slide the housing assembly forward and out of the frame.
- 3). Remove the electrical power connector from the back of the headlight ballast.
- 4). Install the new headlight assembly. Installation is the reverse of removal.
Subscribe to our newsletter
Sign up here to get the latest news, updates and special offers delivered directly to your inbox.
You can unsubscribe at any time