- 1). Use your Phillips screwdriver to remove the screws on the headlamp bezels, or rims around the exterior of the headlamp. After removing these screws, remove the bezels by lifting them upward off of the headlamps.
- 2). Use your flat-head screwdriver to remove the three screws on the headlamp retaining ring.
- 3). Hold the headlamp while removing the retaining ring by lifting it upward and off of the the headlamp. Then, disconnect the headlamp connector plug. Afterward, remove the headlamp from the housing and molding and set it aside.
- 4). Repeat this process for the other headlamp. Be sure to keep all screws together for the installation of new headlamps.