Wall shelving can be utilized to provide valuable organization and store anything from seasonal items to books, and they are likewise ideal for displaying collections.
Regardless of how little experience you have with tools, you can effortlessly put in shelving without help from a professional.
Vertical areas in your home can be turned into storage or a place to show off your items.
Locating the studs in the wall.
Locating at minimum one wall stud will help to make your wall shelving safe and secure.
Prior to installing shelving, use a basic magnetic or electronic stud finder to find the studs in the wall.
Stud locators are sold in all price ranges, and even a cheap stud locator will be sufficient for the job.
Leveling and installing standards.
The metal bars that hold the shelf brackets are referred to as standards.
They are very easy to install and level vertically.
Upon locating a wall stud, use an appropriately sized deck screw or drywall screw to attach the initial standard to the wall; be cautious not to screw it in all the way.
In this way, adjustments can be made.
Also, the screw must be at minimum 1 inch long so that it will totally support the weight of the shelving and displayed items.
Keep in mind that shelving over thirty-six inches in length or a unit that will hold more than two shelves should be outfitted with more than two standards.
To prevent the shelving sagging, be sure to use a minimum of three standards.
Once the first standard is in position, use a level to determine the appropriate upright positioning, and then sink a screw into the next hole.
Securely attach screws to the wall in the remainder of the holes, and do the same with the next standard after making sure of the distance it should be positioned from the first one.
You will also have to make sure the standards are situated at the same height so the shelves will be level, and this is easily accomplished by using a laser level.
Indicate the appropriate locations using a carpenter's pencil.
If the second standard will not be installed over a stud in the wall, you may need to use wall anchors.
Toggle bolts are the best types of wall anchors to utilize for this purpose.
The wings are movable, and after the bolt and attachment are placed through the wall, the wings automatically open and hold the heavy item in place.
Plastic wall anchors may also be utilized, but make certain they have the ability of securely supporting the weight of shelves and items that are to be displayed.
Use a similar technique of adding center standards, if needed, but make certain that the toggle bolts will fit through the holes if they are to be used.
Install the brackets that will hold up the shelving after the standards in place.
If the brackets not adequately long to house the shelves, they can still be used.
Simply mark the locations of the tips of the brackets against the bottom of shelving boards, and use a saw to make notches to accommodate the tips.
Pay careful attention to the load rating of the brackets before using them to hold heavy items.
Install shelves on brackets.
The last step is to install the shelving on the brackets.
Costly ready-made laminate or finished wood shelving is not necessary.
Cheap wooden planks bought at your local home improvement store can be used instead.
Consider having them cut to your particular specifications before buying, and remember that they can be decorated or painted as well in order to coordinate with any decor theme.